Specifications; General Specifications - Omron SYSMAC CPM2B Operation Manual

Specifications

2-1

Specifications

2-1-1 General Specifications

Item
With relay outputs
Supply voltage 24 V DC
(Allowable range: 20.4 to 26.4 V DC)
Power consumption 20 W max.
Inrush current 20 A max.
Insulation resistance 20 MΩ min. (at 500 V DC) between the external DC terminals and non-current carrying metal
parts
Dielectric strength 1,000 V AC 50/60 Hz for 1 min between the external DC terminals and non-current carrying
metal parts
Noise immunity Conforms to IEC6100-4-4; 2 kV (power lines)
Vibration resistance 10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s
for 80 minutes each
(8 minutes of vibration × 10 repetitions= total time 80 minutes)
Shock resistance 147 m/s
Ambient temperature Operating: 0 to 55°C
Storage: –25 to 70°C (excluding the battery)
Ambient humidity Operating: 10% to 90% (with no condensation)
Ambient atmosphere Operating: Must be free from corrosive gas
I/O configuration Inputs: Connector
Outputs: Terminal block
Power supply 2 ms min.
retention time
Weight 300 g max.
22
CPU Boards
With transistor
outputs
2
three times each in X, Y, and Z directions
Inputs: Connector
Outputs: Connector
Expansion I/O Boards
With relay outputs
Supplied from CPU Board.
---
---
2
in X, Y, and Z directions
Inputs: Connector Inputs: Connector
Outputs: Terminal block Outputs: Connector
300 g max.
Section 2-1
With transistor
outputs