Fe Lock - Canon EOS D60 Instructions Manual

Using the Built-in Flash

FE Lock

FE (flash exposure) Lock obtains and locks the correct flash exposure reading for any part of a
subject. FE Lock is a function in the Creative zone.
1
2
If the subject is far enough away to cause underexposure, the < > icon will blink
in the viewfinder. Move closer to the subject and repeat steps 2 – 4.
90
1 Make sure the < > icon in the
viewfinder is on.
●
In the Creative zone, press the < > button
to pop up the built-in flash.
Focus on the subject.
2
●
Focus on the subject you want to lock the
flash exposure on.
Place the center AF point over the
3
subject, and press the <
button.
( 16 )
➡
The Speedlite fires a preflash and records
the required flash output for this subject in
memory.
➡
The < > icon lights in the viewfinder.
➡
The center AF point will flash in red.
➡
In the viewfinder, the display appears as
1
shown in for 0.5 seconds, then changes
2
to .
●
Each time you press the <
preflash fires, and the FE lock is applied at
the required exposure level.
4 Take the picture.
●
Compose the shot and take the picture.
>
> button the