Selecting A Drive Mode - Canon EOS D60 Instructions Manual

Selecting a Drive Mode

You can set the EOS D60's drive mode to single-frame shooting, continuous shooting or self-
timer operation.
Single-frame shooting <
Continuous shooting <
Self-timer operation:
Size/Quality
Large/Fine
Large/Normal
Medium/Fine
Medium/Normal
Small/Fine
Small/Normal
RAW
●
The figures above are based on Canon's testing standards (at 1/250 sec. or faster and ISO
100).
If the CF card's remaining capacity is enough for less than 8 images, continuous
shooting might not be possible.
>: Press the shutter button to take one image.
>: You can use the continuous shooting mode by pressing and
holding the shutter button.
When you press the shutter button, the picture will be taken
about 10 sec. later. (→81)
Maximum number of images
(Approx. images/sec.)
ONE SHOT AI SERVO
3 2.5
Press the < DRIVE> button. (
1
2 Select the drive mode.
●
●
Max. Burst During Continuous Shooting
(Approx. images)
ONE SHOT
Look at the LCD panel as you turn the
< > or < > dial.
: Single-frame shooting
: Continuous shooting
: Self-Timer Operation
Press the shutter button down halfway to
return to ready-to-shoot mode.
AI SERVO
8
)
6
63
3