Protecting An Image - Canon EOS D60 Instructions Manual

Protecting an Image

You can erase-protect images to prevent accidental erasure.
You can press the <
protect individual pictures.
The <
Once an image is protected, it cannot be removed by the camera's Erase function.
To erase a protected image, you must first remove the protection.
If you protect the images you need and erase all the images at once (→104), all
non-protected images will be erased. This is handy when you want to erase all the
images you do not need at once.
> button to switch between single-image and index display in order to
1
2
3
> icon
From the menu, select [Protect].
●
Press the < MENU> button.
●
Turn the < > dial to select [Protect].
Open the Protect Settings screen.
●
Press the < > button.
➡
The display goes to the Protect Settings
screen.
●
Press the < > button to show the
Protect Settings screen on an index display,
then press the <
the Protect Settings screen on a single
image display.
Protect the image.
●
Turn the < > dial to select the image you
want to protect, then press the <
button.
➡
Protected images are identified with a <
icon.
●
Press the < > button again to cancel
protection and delete the <
●
If you have other images to be protected,
repeat the above steps.
●
Press the < MENU> button to exit Protect
mode.
> button again to show
>
>
> icon.
103
5