Replacing The Date/Time Battery - Canon EOS D60 Instructions Manual

Replacing the Date/Time Battery

When the date/time back-up battery level is low, "
the CR2025 lithium battery as follows.
If you replace the backup battery while the camera is connected to a battery pack with power
remaining or to a DC coupler, the date, time, and other menu functions will retain their settings.
( + )
(–)
For the date/time battery, be sure to use a CR2025 lithium battery.
" will appear on the LCD panel. Replace
1 Set the Main Switch to < OFF >.
Open the date/time battery cham-
2
ber cover by turning it 45 degrees
counterclockwise, as shown by
the arrow in the diagram.
●
Be careful not to rotate the cover more than
45 degrees.
3 Take out the old battery.
●
With the camera bottom facing downward,
push in the edge of the battery to take it
out.
4 Install a new battery.
●
The plus side of the battery must face
upward.
5 Close the cover by turning it
clockwise, as shown by the arrow.
●
If the date and time now displayed in the
LCD panel are incorrect, you will need to
set them. (→34)
5
113