Door Locked Indicator - Candy GC4 2D User Instructions

Hide thumbs Also See for GC4 2D:
Table of Contents

Advertisement

NL
"DIGITAAL" DISPLAY
Het display indicatie sijsteem
geeft u de mogelijkheid
continue op de hoogte te
blijven van de status van de
machine.
1) CENTRIFUGE TOERENTAL
Als het programma is
geselecteerd, zal het
maximale aantal toeren
toegestaan voor het
programma worden
weergegeven. Elke keer als u
de centrifuge knop indrukt zal
het toerental met 100 rpm
afnemen. Het minimum is 400
rpm, het is mogelijk de
centrifuge uit te schakelen
door de centrifuge toets
meerdere malen in te
drukken.
2) UITGESTELDE START LAMPJE
Deze knippert als de
uitgestelde start is ingesteld.
3) DEURVERGRENDELING-
INDICATIE
Het indicatielampje voor de
"deurvergrendeling" licht op
als de deur goed dichtzit en
wanneer de wasmachine
AAN staat.
Wanneer u op START drukt als
de deur dicht is, zal het
indicatielampje eventjes
knipperen en vervolgens
blijven branden.
Als de deur niet dicht is, zal
het indicatielampje blijven
knipperen.
Een speciale beveiliging zorgt
ervoor dat u de deur niet
meteen kunt openen na
afloop van een wascyclus.
Wacht na afloop van de
wascyclus 2 minuten tot het
lampje van de
deurvergrendeling is gedoofd
voordat u de deur probeert te
openen. Zet na afloop van de
wascyclus de
programmaknop op UIT (OFF).
SL
DIGITALNI PRIKAZOVALNIK
Sistem prikazovanja vas sproti
obve‰ãa o vseh parametrih
pranja:
1) HITROST CENTRIFUGIRANJA
KO izberete program, se na
prikazovalniku prikaÏe
najvi‰ja dovoljena hitrost
centrifugiranja za izbrani
program. S pritiskom na tipko
za nastavljanje hitrosti
centrifugiranja lahko to
hitrost zniÏate; ob vsakem
pritisku na tipko se vrednost
zmanj‰a za 100 vrt./min.
NajniÏja moÏna hitrost
centrifugiranja je 400
vrt./min, ãe pa ‰e enkrat
pritisnete na tipko za
nastavljanje hitrosti
centrifugiranja,
centrifugiranje prekliãete.
2) LUâKA ZA ZAMIK VKLOPA
âe je nastavljen ãasovni
zamik vklopa, luãka utripa.
3) LUâKA 'ZAKLENJENA
VRATA'
Luãka se osvetli, ko pravilno
zaprete vrata in vklopite stroj.
Ko pritisnete na tipko START,
medtem ko so vrata zaprta,
luãka kratek ãas utripa, nato
pa ostane osvetljena.
âe vrata niso pravilno zaprta,
luãka ‰e naprej utripa.
Posebna varnostna naprava
prepreãuje takoj‰nje
odpiranje vrat po koncu
programa. Poãakajte 2
minuti in ko luãka ugasne,
lahko odprete vrata. Ko je
program pranja zakljuãen,
obrnite stikalo programatorja
na OFF.
EN
"DIGITAL" DISPLAY
The display's indicator
system allows you to be
constantly informed about
the status of the machine:
1) SPIN SPEED
Once the programme has
been selected, the
maximum spin speed
allowed for that programme
appears on the display.
Pressing the spin button will
reduce the speed by 100
rpm each time the button is
pressed. The minimum
speed allowed is 400 rpm, or
it is possible to omit the spin
by pressing the spin button
repeatedly.
2) DELAY START LIGHT
This flashes when delay start
has been set.
3) DOOR LOCKED
INDICATOR
The "Door Locked" indicator
light is illuminated when the
door is fully closed and the
machine is ON.
When START is pressed on
the machine with the door
closed the indicator will flash
momentarily and then
illuminate.
If the door is not closed the
indicator will continue to
flash.
A special safety device
prevents the door from
being opened immediately
after the end of the cycle.
Wait for 2 minutes after the
wash cycle has finished and
the Door Locked light has
gone out before opening
the door. At the end of cycle
turn the programme
selector to OFF .
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gc4 1272d2

Table of Contents