Canon EOS 10D Software Instructions page 66

Setting RemoteCapture
1 You can use this option to take shots when there is no CF card in the camera or when the
CF card is full.
2 Saves captured images both on your computer and on the CF card in the camera.
3 Use this field to enter a file name when saving a captured image.
* The file name can consist of up to 16 characters.
4 Sets the number of digits in the sequence number that follows the file name and the
starting number used.
* If you enter [Capture] into [File Prefix] field, [5] into [Number of Digits], and [1] into [Start],
sequential file names will be assigned automatically beginning with [Capture_00001.jpg]
or [Capture_00001.crw].
5 Displays the directory path for the folder in which files are saved.
6 Displays the folder used to save files in Explorer.
7 Use this to select the drive on which files are saved.
8 Creates a new folder.
9 Applies the specified settings, closes the [Preferences] dialog box and ends the
procedure.
10 Cancels all the specified settings, restores the previous settings and ends the procedure.
You can set the Hotkey for shutter release by selecting the [Release Hotkey] tab.
W-54