Canon EOS 10D Software Instructions page 18

Installing the Software
8
Proceed with the installation as directed by the on-screen
messages.
9
When installation has finished, restart your computer.
10
After the restart, remove the SOLUTION DISK from the CD-ROM
drive.
11
Plug the interface cable into the computer.
●
Plug the cable into the USB port on
the computer.
●
The location of the port differs
depending on your computer. Refer
to the User's Manual for your
computer for details.
12
Plug the interface cable into your camera.
●
Open the cover and plug the
interface cable connector into the
< > terminal with the <
(USB) icon facing the front of the
camera.
W-6
>
Interface
cable
USB port
Interface
cable
DIGITAL terminal