Starting Remotecapture - Canon EOS 10D Software Instructions

Starting RemoteCapture

1
Connect the camera to your computer. (➞M-8)
●
In OS 9, ImageBrowser starts up and the [Auto Run] dialog box appears. Click the
[Cancel] button and select [Quit] from the [File] menu to exit ImageBrowser.
2 Double-click the [Canon Utilities] folder s the [RemoteCapture]
folder s [RemoteCapture] to start.
\
A message appears prompting you to connect the camera to your computer.
3
Click the [Connect] button.
●
When the [Communication
Settings] dialog box appears,
select [USB Port] from the [Port] list
box, select [EOS 10D] from the
[Detected Camera] list box and
then click the [Set] button.
\
The Shooting window and Save
window appear.
Shots to Go
Displays the number of frames that
can be saved on your computer or
on the CF card in the camera.
Detail setting button
Displays the Detailed Settings
window below the Shooting window
allowing you to make various
settings. Click the button again to
close the Detailed Settings window.
M-46
Shooting window
Size/Quality list box
Allows you to select the
recorded quality of images.
Release button
Takes a shot with the camera.
The image is automatically
saved on your computer.
Even when you press the
shutter button on the camera,
the image is saved on your
computer.