Locating The End Of The Last Scene; On-Screen Displays (Data Code) - Canon ZR960 Instruction Manual

Locating the End of the Last Scene

After playing back a tape, use this
function to locate the end of the last
scene recorded in order to continue
recording from that point.
switch:
POINTS TO CHECK
Stop the playback before using this
function.
FUNC.
[ END SEARCH]
• [END SEARCH] appears.
• The camcorder rewinds/fast forwards
the tape, plays back the last few
seconds of the recording and stops
the tape.
• To cancel the end search push the
joystick ( ) toward
NOTES
• End search cannot be used once you
remove the cassette.
• If there are blank sections between
recordings, the end search may not
work correctly.
28 •
Video
[EXECUTE]
.

On-Screen Displays (Data Code)

The camcorder keeps a data code
containing the date and time of
recording. You can select the data to be
displayed.
switch:
Options
[ OFF]
No data code display.
[ DATE], [ TIME]
Displays the date or time when the scene was
recorded.
[ DATE & TIME]
Displays both the date and time of the recording.
FUNC.
[ MENU]
[ DISPLAY SETUP/
[DATA CODE]
FUNC.
Default value
]
Desired option