Maintenance/Others - Canon ZR960 Instruction Manual

Digital video camcorder
Hide thumbs Also See for ZR960:
Table of Contents

Advertisement

Maintenance/Others

Cleaning
Camcorder Body
• Use a soft, dry cloth to clean the
camcorder body. Never use
chemically treated cloth or volatile
solvents such as paint thinner.
Lens and Viewfinder
• If the lens surface is dirty, the
autofocus may not work properly.
• Remove any dust or dirt particles
using a non-aerosol type blower
brush.
• Use a clean, soft lens-cleaning cloth
to gently wipe the lens or viewfinder.
Never use tissue paper.
LCD Screen
• Clean the LCD screen using a clean,
soft lens-cleaning cloth.
• Condensation may form on the
surface of the screen when the
temperature changes suddenly. Wipe
it with a soft dry cloth.
Condensation
Moving the camcorder rapidly between
hot and cold temperatures may cause
condensation (water droplets) to form
on its internal surfaces. Stop using the
camcorder if condensation is detected.
Continued use may damage the
camcorder.
56 •
Additional Information
Condensation may form in the following
cases:
• When the camcorder is moved
quickly from cold to warm places
• When the camcorder is left in a humid
room
• When a cold room is heated rapidly
T
O AVOID CONDENSATION
• Do not expose the camcorder to
sudden or extreme changes in
temperature.
• Remove the cassette, place the
camcorder in an airtight plastic bag
and let it adjust to temperature
changes slowly before removing it
from the bag.
W
HEN CONDENSATION IS DETECTED
• The camcorder automatically shuts
off, the warning message
[CONDENSATION HAS BEEN
DETECTED] appears for approx.
4 seconds and
• If a cassette is loaded, the warning
message [REMOVE THE CASSETTE]
appears and
Remove the cassette immediately
and leave the cassette compartment
open. Leaving the cassette in the
camcorder may damage the tape.
• A cassette cannot be loaded when
condensation is detected.
R
ESUMING USE
The precise time required for water
droplets to evaporate will vary
depending on the location and weather
conditions. After the condensation
warning stops flashing, wait for 1 more
hour before resuming use.
starts flashing.
starts flashing.

Advertisement

Table of Contents
loading

This manual is also suitable for:

3543b001Zr 960

Table of Contents