Reviewing The Last Scene Recorded - Canon ZR960 Instruction Manual

second*, ensuring you do not miss
important shooting opportunities.
* The actual time required varies depending
on the shooting conditions.
switch:
1
With the camcorder on, close the
LCD panel.
• If you are using the viewfinder and
the LCD panel is closed, press
VIEWFINDER
mode.
• A beep will sound and the orange
STANDBY indicator will turn on to
indicate the camcorder entered
standby mode.
2
When you wish to resume
recording, open the LCD panel.
• STANDBY indicator goes out and
the camcorder is ready to record.
• You can also press
resume recording using the
viewfinder with the LCD panel
closed.
IMPORTANT
Do not disconnect the power source while
the camcorder is in standby mode
(STANDBY indicator is lit in orange).
NOTES
• If you close the LCD panel under some
circumstances (for example, while a
menu is being displayed), the
camcorder may not enter standby
mode. Check that the orange STANDBY
indicator turns on.
• The camcorder will shut off if left in
standby mode for 10 minutes,
regardless of the [POWER SAVE] setting
( 49). To restore the power if the
camcorder shut off, turn the camcorder
off and then on again.
26 •
Video
to enter the standby
VIEWFINDER
• You can select the length of time until
shut-off or turn off the Quick Start
function altogether with the [QUICK
START] setting (
• Opening the cassette compartment
cover while the camcorder is in standby
mode will reactivate the camcorder.

Reviewing the Last Scene Recorded

switch:
to
1
Set the mode switch to
2
Press
guide.
3
Push the joystick (
toward
• The camcorder will play back a few
seconds of the last recording made
and return to record pause mode.
• You can also hold the joystick
pressed down (
( ) toward
(backward or forward respectively) in
order to locate the point where you
want to start recording.
49).
EXP
FOCUS
to display the joystick
) momentarily
and release it.
) toward
to play back the tape
.
or