List Of Messages - Canon ZR960 Instruction Manual

List of Messages

CHANGE THE BATTERY PACK
- Battery pack is exhausted. Replace or
charge the battery pack (
CHECK THE CASSETTE [INCORRECT
TAPE SPECIFICATION]
- You attempted to play back a tape
recorded in HD (high definition) standard.
CHECK THE INPUT
- The DV cable is not correctly connected
to the DV terminal (
connected digital device is turned off.
CONDENSATION HAS BEEN DETECTED
- Condensation has been detected in the
camcorder (
CONDENSATION HAS BEEN DETECTED
REMOVE THE CASSETTE
- Condensation has been detected in the
camcorder ( 56). Remove the cassette.
COPYRIGHT PROTECTED DUBBING
RESTRICTED
- You attempted to dub a copyright
protected tape (
COPYRIGHT PROTECTED PLAYBACK IS
RESTRICTED
- You attempted to play back a copyright
protected tape (
HEADS DIRTY, USE CLEANING CASSETTE
- Video heads are dirty. Clean the video
heads ( 2).
52 •
Additional Information
(in alphabetical order)
15).
39), or the
56).
42).
42).
INCORRECT TAPE SPECIFICATION
PLAYBACK IS RESTRICTED
- You attempted to play back a tape
recorded in a different television system
(PAL or SECAM) or in a recording
standard not supported by this
camcorder.
INPUT SIGNAL NOT SUPPORTED
- The digital device connected with the DV
cable is incompatible with the camcorder.
REMOVE THE CASSETTE
- Camcorder stopped operating to protect
the tape. Remove the cassette and
reinsert it ( 21).
SET THE TIME ZONE, DATE AND TIME
- You have not set the time zone, date and
time. This message appears each time
you turn the power on until you set the
time zone, date and time (
TAPE END
- Tape reached the end. Rewind the tape or
replace the cassette.
THE TAPE IS SET FOR ERASURE
PREVENTION
- Cassette is protected. Replace the
cassette or change the position of the
protect switch (
20).
55).