Electrical Connection - Pelgrim TPY310 Manual

5 Installation instructions

5.2 Electrical connection

230V - 50Hz - 2500W
• The electrical connection must comply with national and local regulations.
• Wall socket and plug must be accessible at all times.
• If you want to make a fi xed connection, ensure that a multi-pole switch with a
distance between contacts of 3 mm is installed in the supply cable.
• Do not use an adapter or an extension lead to connect the device to the electrical
mains. Safe use of the device cannot be guaranteed with these accessories.
Warning!
This appliance must be earthed.
Installation, maintenance or repairs should only be carried out by professionals who are
authorized by the manufacturer, as failure to do so will void the warranty.
The device should be disconnected from the mains prior to installation, maintenance or
repairs. The device is only disconnected from the electric power if:
• the main switch of the electrical wiring/installation in the house is switched off, or
• the fuse for the electrical wiring/installation in the house has been completely
removed, or
• the plug has been pulled out of the socket.
Faulty parts may only be replaced by original Pelgrim parts. Only those parts are
guaranteed by Pelgrim to meet the safety requirements.
If the connecting cable is damaged, it may only be replaced by the manufacturer, the
manufacturer's service organisation or equivalently qualifi ed persons, in order to avoid
dangerous situations.
53