Installation Instructions; Important Matters - Pelgrim TPY310 Manual

5 Installation instructions

5.1 Important matters

• This appliance should only be connected up by a registered installer!
• Do not use the teppan yaki if it is damaged.
• Never open the casing of the teppan yaki. This may only be done by a qualifi ed
installer.
• Ensure that the fl exes of electrical appliances, e.g. a mixer, do not touch the hot grill
zone.
• Always disconnect the appliance from the electronic power supply before any repair
work is carried out. You do this by unplugging the appliance, by switching off the
fuse(s) or, if you have a permanent connection, by setting the switch on the power
supply lead to zero.
• Do not use a teppan yaki that is broken or contains cracks. Switch off the appliance
immediately, unplug it from the power supply to avoid any electrical shocks and call
the service department.
• The connection must comply with all national and local regulations.
• The appliance must always be earthed.
• The connection cable should hang unobstructed and not run the risk of being hit by
a drawer.
• Ensure that the teppan yaki is built into a fl at worktop.
• The walls and the worktop surrounding the appliance should be heat-resistant to at
least 85 °C.
• The warranty does not cover any damage resulting from a wrong connection, faulty
assembly or improper use.
• The cables connecting the teppan yaki to the control box should not be bent,
twisted or pressed down by an object. Ensure that this does not happen when
unpacking and installing the teppan yaki.
52