Faults; Temperature Limitation; Fault Table - Pelgrim TPY310 Manual

4 Faults

4.1 Temperature limitation

When the teppan yaki has been switched on, a sensor continuously monitors the
temperature of the parts of the grill plate. If the temperature gets too high, the power of
the grill plate is automatically reduced.

4.2 Fault table

In case of an electrical failure, please check all fuses and electrical connections in your
home before you contact the service department.
Fault
A slight smell is noticeable
the fi rst few times that you
use the grill plate.
The grill plate becomes
too hot during frying and
will not remain at the set
temperature.
Possible cause
The appliance is heating
up.
The thermostat has broken
down.
Solution
This is normal and the
smell will disappear after
you have used the teppan
yaki a few times. Ventilate
your kitchen.
Contact the service
department.
51