Advertisement
Quick Links
CY3218-CAPEXP1 C
1
1. Insert the AAA battery.
2. Remove the jumper from J2.
3. Observe that the Power LED
lights up.
3
Insert the kit CD and run the CD's
autorun utility.
®
S
E
AP
ENSE
XPRESS
QUICK START GUIDE
2
1. Touch the CapSense buttons to
change the status of the respective
LEDs.
2. Press the mechanical button S1
to light up all status LEDs.
4
Open the guide and install PSoC
Programmer and PSoC Designer.
™ EVALUATION KIT
Advertisement
Related Manuals for Cypress CAPSENSE EXPRESS CY3218-CAPEXP1
Summary of Contents for Cypress CAPSENSE EXPRESS CY3218-CAPEXP1
- Page 1 ® CY3218-CAPEXP1 C ™ EVALUATION KIT ENSE XPRESS QUICK START GUIDE 1. Insert the AAA battery. 1. Touch the CapSense buttons to change the status of the respective 2. Remove the jumper from J2. LEDs. 3. Observe that the Power LED 2.
- Page 2 CapSense Buttons Power Selection Jumper (J2) For the latest information about this kit, visit http://www.cypress.com/go/CY3218-CAPEXP1 © 2009-2012 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks referenced herein are the properties of their respective owners. Doc.#: 001-44769 Rev. *E...
Need help?
Do you have a question about the CAPSENSE EXPRESS CY3218-CAPEXP1 and is the answer not in the manual?
Questions and answers