Advertisement
The recent popularity of adjustable height basketball systems has increased the risk of dental injury,
particularly to young players, due to players getting their teeth caught in the net.
GOAL HARDWARE (M)
BACKBOARD MOUNTING
H - FRAME (Q)
Figure 2
8. On BA832 systems attach 2 Backboard Mounting Angles (E) to the Backboard (K) using 5/16 x 1 1/2"
Carriage Bolts (N), 5/16" Flat Washers (H) and 5/16" Flange Nuts (G). On BA833 systems attach the 4
Backboard Mounting Angles (E) to the Backboard (K) using the Acrylic Backboard Hardware (J).
Follow the instructions provided with the hardware marked "BAACRYLIC". See Figure 4 and 5.
9. Mount the Backboard (K) and Goal (L) to the Extension Arm Assembly (B) using the hardware
provided with the Goal (M). See Figures 2,4, and 5.
10. Tighten all hardware assuring that the goal and backboard are level.
11. Install net provided with goal.
12. To adjust the height of the rim loosen the telescoping lock bolt, then loosen the lock handle while
gripping the adjustment handles. Adjust the pole upwards until the top of the goal measures 10' from the
playing surface. Lock the pole at that height and apply the 10' Height Indicator Label (I) to the plated
inner tube. Line up the arrows on the 10' label to the already attached "Rim Height Indicator" label.
Adjust the pole downward so that the goal measures 9' 6" from the playing surface. Lock the pole and
apply the appropriate height indicator label to the plated inner tube. Continue to lower the goal at 6"
increments, being careful to lock the pole each time, and apply the appropriate height labels until the
height of 8' from playing surface is reached. See Figure 6
13. To roll the system, unscrew the Lock Knob (P) to release the lower front padding. This will lower the
unit to the portable position. To lock in place push padding to the original position and tighten the Lock
(provided with goal)
BACKBOARD (K)
Warning!
GOAL (L)
Figure 3
3
F
C
E
G
H
B
D
F
G
E
Advertisement
