Table of Contents
Advertisement
Installing batteries into the Samsung Smart Remote
1
Press the
button at the top rear of the Samsung Smart Remote. The body will pop out slightly from the body cover.
2
Turn the remote over, and then slide the body of the remote upwards until the battery compartment is revealed.
3
If there are batteries in the remote, press the r and l buttons on both sides of the battery compartment to remove the existing batteries.
4
Insert two new batteries (1.5V AAA type) into the battery compartment making sure that the batteries' polarities (+, -) are oriented correctly. When done, slide the body of the remote until it is
nearly in its original position.
5
Turn the remote over, press and hold the
•
Alkaline batteries are recommended for longer battery life.
button on the top rear, and then slide the body of the remote down into place.
16
Advertisement
Table of Contents
