Samsung SBB-SSN Quick Setup Manual

Quick Setup Guide
SBB-SSN SBB-SSNU
* The colour and the appearance may differ depending on the product, and the content in
the manual is subject to change without prior notice to improve the performance.
* Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
The terms HDMI and HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States and other countries.
Checking the Components
Contact the vendor where you purchased the product if any components are missing.
The pictures may look different from the actual components.
Warranty card
Quick Setup Guide
(Not available in some locations)
Remote Control RS232C(IN) adapter
External IR cable Mount bracket
Screw (M4 x L8, B-Type) x 4
-02
Batteries (AAA x 2)
Power cord
(Not available in some locations)
AC/DC adapter HDMI cable
Foot rubber x 2 Screw (M4 x L8, S-Type) x 5
Ports
POWER
STATUS
1
1 2
View the power status of the Signage Player Box.
1
Power on or off the Signage Player Box.
2
Connect to a USB memory device.
3
* USB 1: The USB ports on the product accept a maximum
constant current of 0.5A. If the maximum value is exceeded,
USB ports may not work.
* USB 2: The USB ports on the product accept a maximum
constant current of 1.0A. If the maximum value is exceeded,
USB ports may not work.
Connect to the external IR cable.
4
Attaching to display
1 2
3 4
Align the short side of the mount bracket with the bottom of the
1
Signage Player Box, and push to click in.
Continue fitting the other side of the mount bracket.
2
Fasten the screws (M4 x L8, S-Type).
3
Position the Signage Player Box on the back of the display and
4
fasten it.
* Use different screws based on the material the backside of
display is made of.
‐ Plastic: M4 x L8, B-Type
‐ Metal: M4 x L8, S-Type
SD CARD
0
USB HDMI OUT RJ 45 DC 14V
RS232C
IR IN AUDIO OUT
2
OUT IN
3 4 5 6 7 8 9
Outputs sound to an audio device via an audio cable.
5
Connects to MDC using an RS232C adapter.
6
Connects to another display device, using an HDMI cable.
7
* We recommend using authorized cables for HDMI cable
connections. Use the supplied HDMI cable.
Connects to MDC using a LAN cable. (10/100 Mbps)
8
Connects to the AC/DC adapter.
9
Connect to an SD memory card.
0
* This function may not be supported depending on the model.
Connecting to the Signage Player Box
Connect the HDMI cable to the HDMI OUT ports on the Signage
Player Box and the display.
* Press the SOURCE button on the remote control to change the
input source to HDMI.
* To view media in UHD resolution, use the supplied HDMI cable.
* The device may generate heat during operation. Need caution.