Table of Contents
Advertisement
22
Dl45 driftwood log set installation (optional)
!
WARNING!
WARNING!
logs specifically approved with this appliance may result in property damage or personal injury.
WARNING!
log positions, since appliance may not function properly, and delayed ignition may occur.
WARNING!
!
NOTE!
Log colors may vary. during the initial use of the appliance, the colors will become more
uniform as color pigments burn in during the heat activated curing process. Place the logs on top of
the glass ember bed and around the burner tray as shown, making sure not to cover any burner ports
or the ignition portion of the burner.
8
Complete Layout of Log Set
Step by Step Guide
•
Install the glass embers as described in the previous section.
•
Place the logs as shown in the following figures and refer to the diagram above for the identification
number of each log.
FIG 1.
www.napoleon.com
Discard the bag of sand included with this kit. It cannot be used with the gss48.
Failure to position the logs in accordance with these diagrams or failure to use only
Logs must be placed in their exact location in the appliance. Do not modify the proper
The logs are fragile and should be handled with care.
5
DO NOT COVER
4
3
1
2
N415-0346-AU FEB 23.21
Advertisement
Table of Contents
