Napoleon Galaxy Series Manual page 21

Finishing
Glass Ember Installation
!
WARNING!
WARNING!
Do not change or substitute the glass ember material provided with this appliance. If replacing, use
only replacement glass embers available from your local authorized dealer / distributor.
WARNING!
Clean the glass with mild dish soap, drain, rinse thoroughly and dry before installing.
1. Carefully pour the glass embers onto the appliance ember tray as shown.
2. Spread the glass embers over the tray and burner. The distribution of clear glass over the burner will
influence flame height.
3. The glass embers must cover the mesh area of the burner tray while ensuring no glass is placed on
the ignition portion of the burner as illustrated below.
ENSURE NO GLASS IS PLACED ON THE IGNITION PORTION OF THE BURNER,
DIFFICULTIES IN LIGHTING MAY RESULT.
MEK Rock Installation (Optional)
!
WARNING!
Place the refactory rocks on top of the glass ember bed and around the burner tray as desired, making
sure not to cover any burner ports or the ignition portion of the burner.
ENSURE NO ROCK IS PLACED ON THE IGNITION PORTION OF THE BURNER,
DIFFICULTIES IN LIGHTING MAY RESULT.
N415-0346-AU FEB 23.21
Do not use the appliance without the glass embers in place.
Glass embers may have sharp edges, wear safety glasses and gloves when handling.
Glass embers may have a fine oil residue that needs to be cleaned prior to installation.
Real rocks must not be used in this appliance. Heat will cause them to explode.
21
www.napoleon.com