Calculated Industries 8400 User Manual page 6

%
Four-function (+, –, x, ÷) percent
key. See Percent Calculations sec-
tion for details.
0 – 9 and •
Keys used for entering digits.
/ — Fraction Bar
Used to enter fractions. Fractions
may be entered as proper (1/2, 1/3,
1/4, 1/8) or improper (7/6, 9/3). They
will be displayed in 1/8, 1/4, 1/3, or
1/2 increments. You can also use /
to toggle between fractional and
decimal displays.
c
Used to convert between units of
measure or access secondary
functions.
c /
Used to round decimal values to the
nearest quilter's fraction. Also used to
round yardage values up to the clos-
est fractional value if the decimal
yardage exceeds the closest fraction-
al equivalent by 0.01 Yard. See
Appendix C for details on Fractional
Rounding.
U ' G
SER S UIDE
— 2