Removing & Installing Body Components; Side Cover - Honda VT1300CR/CRA Manual

Removing & Installing Body Components

Side Cover

The right side cover must be removed to
remove the seat, to service the circuit fuses
and to access the owner's manual.
The left side cover must be removed to
remove the seat, to service the main fuse and
the battery.
Prongs Side cover
Grommets
Grommets
The right and left side covers can be removed
in the same way.
❙
Removal
1. Pull the side cover out until the prongs are
clear of the grommets.
2. Remove the side cover.
❙
Installation
1. Align the right and left side cover tabs.
2. Position the side cover so the prongs are
aligned with the grommets.
3. Push the prongs in.
Prongs
Side cover
53