Honda VT1300CR/CRA Manual page 95

❙
Headlight Bulb
Grommet Bolt
Headlight
Bolt Bolt Connector
1. Remove the bolts from the headlight case.
2. Remove the headlight rim by pulling its
lower end forward and release the tabs.
3. Remove the headlight by pulling it
forward and release the grommet.
4. Disconnect the connector.
Electrical Trouble
Pin
Tabs
Bolt
5. Remove the seat rubber.
6. Unhook the pin and remove the bulb.
7. Install a new bulb and parts in the reverse
order of removal.
u Install the seat rubber with its TOP mark
facing up.
Do not touch the glass surface with your
fingers. If you touch the bulb with your bare
hands, clean it with a cloth moistened with
alcohol.
u Burned-out Light Bulb
Seat rubber
TOP mark
Bulb
continued
93