Final Drive Oil - Honda VT1300CR/CRA Manual

Final Drive Oil

Checking the Final Drive Oil
1. Place your motorcycle on the side stand
on a level surface.
2. Hold your motorcycle in an upright
position.
3. Remove the oil fill hole cap.
4. Check the oil level. It should be flush with
the lower edge of the oil fill hole.
Oil fill hole cap
Adding Final Drive Oil
If the final drive oil level is low, check for oil
leaks. Add the recommended final drive oil
(
2
opening.
1. Pour the final drive oil into the oil fill hole
2. Reinstall the oil fill hole cap and tighten.
Lower edge
) until it reaches the lower edge of the
P. 48
until it reaches the lower edge of the
opening.
u Do not over fill above the lower edge of
oil fill hole.
u Make sure no foreign objects enter the
oil fill hole.
u Wipe up any spills immediately.
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m)
69