Interfaces - Bosch Rexroth ctrlX CORE Manual

16 / 38
Loss of UL/CSA conformity due to modifications at the device.
UL and CSA marking applies only to the device upon delivery. After modifying the device, verify
the UL and the CSA conformity.
To guarantee an UL/CSA-compliant operation, the following conditions have to be met:
−
Use only insulated copper wires suitable for at least 60 °C
9

Interfaces

Fig. 4: Interfaces
NOTICE
Table 12: Control interfaces
No. Name Connection type
XF01 USB host
①
USB 2.0
XF10 Ethernet
②
10/100/1000 MBit
HMI and engineering port
XF50 Ethernet
③
10/100/1000 MBit
Field bus master (Ethercat)
XF51 Ethernet
④
10/100/1000 MBit
Bosch Rexroth AG
Damage of the device by plug mounting under voltage!
−
Before mounting or dismounting components, disconnect
the control - including its components - from voltage.
−
Connect the voltage only after the control and its compo-
nents have been set up.
Connector type
(Integrated)
USB socket,
Type C
RJ45 socket
8-pin
RJ45 socket
8-pin
RJ45 socket
8-pin
1
2
3
4
5
6
7
Mating connector and cable
(From outside)
USB plug,
Type C
RJ45 plug
(Twisted pair, 8-wire)
RJ45 plug
(Twisted pair, 8-wire)
RJ45 plug
(Twisted pair, 8-wire)
R911405645, Edition 02
ctrlX CORE