Operation; Key Functions Of Control Panel - LaboGene ScanSpeed 1248 Instruction Manual

4.

Operation

4-1.

Key Functions of Control Panel

□ RPM/RCF
□ TIME
□ Temp
□ ACC/DEC
□ PROG
□ Fast Cool
□ Pulse
□ Rotor
□ Enter
□ Start/Stop
□ Door
07052013RS01
For automatic conversion of RPM/RCF and to set the speed
Use to set time, available range up to 99 min. 59 sec. (00:00: continuous)
Use to set temperature (-20°C ~ 40°C)
Use to set the acceleration & deceleration level from 1 to 9 steps. '0' in deceleration step
means natural deceleration. Larger number means faster acceleration or deceleration.
Use to save a set of setting values or recall the saved program number
Use to reach rapid refrigeration up to the setting temperature.
Use for quick runs
g-value confirmation for using tube adaptors
Use for completion of data setting
Use to start and stop operation
Use to open instrument lid
Cat. No. 9.900.900.758
CopyRight © 2013
Page 13 of 20