Battery Charger Function - Redback E522D Operation Manual

NOTE: The hedge trimmer will not turn
on when the rear handle is not securely
engaged in the respective end position.
Switching the Trimmer
On/Off
GENERAL SAFETY
WARNING #2!
NOTE: Two-hand safety circuit
The hedge trimmer is switched on and
operated with both hands. One hand
operates the switch on the rear handle,
the second hand the safety switch on
the handlebar, if you release either of
the two switches, the cutter bar
automatically stops.
Switching On
1. Hold the hedge trimmer firmly with
both hands and ensure that there are no
persons (particularly children) or
animals in the immediate vicinity.
2. Press and hold down the switch
interlock (1).
12
3. Press the switch (2) and the safety
switch (3). The hedge trimmer runs.
Switching Off
Release either of the two switches. The
cutter bar stops.
Battery Charger
Lights
The LED light indicates the operating
status and the state of charge of the
battery.
• LED steady red – The charger is ready
to charge but no battery is connected.
• LED flashes green - Battery is
charging.
• LED steady green - The battery is fully
charged and can be removed.
• LED flashes red - Battery fault or
overheat
Status Indicator