Redback E522D Operation Manual page 7

40v lithium-ion cordless hedge trimmer
Table of Contents

Advertisement

5.
Use the unit only in daylight or in
good artificial lighting.
6.
Use the unit in dry conditions only.
Protect it from rain and moisture.
7.
Ensure that the cutter does not
touch the ground or other objects.
8.
Wait until the electric power tool
has come to a standstill before putting it
down.
9.
When interrupting work, never
leave the unit unattended and keep it in
a safe place.
10. Always switch the hedge trimmer off
before transporting it to other
workplaces.
11. Never grasp the blade of the hedge
trimmer.
12.
Ensure that all guards and
handles are fitted before using the unit.
Never attempt to switch on an
incompletely assembled unit or a unit
which has unauthorized modifications.
13.
Operate the unit only in the
technical condition stipulated and
delivered by the manufacturer.
Unauthorized changes to the unit
exclude liability of the manufacturer for
any resulting damage and/or injury.
14.
Spare parts must conform to the
requirements specified by the
manufacturer. Therefore use original
spare parts only or spare parts
authorized by the manufacturer. When
replacing parts, please follow the
6
supplied installation instructions and
remove the battery beforehand.
15.
Have repairs carried out
exclusively by a qualified technician or a
service center.
Safety Instructions for The
Battery Charger
1.
Keep the battery charger away
from rain or moisture. Penetration of
water in the battery charger increases
the risk of an electric shock.
2.
Keep the battery charger clean.
Contamination can lead to danger of an
electric shock.
3.
Before each use, check the
battery charger, cable and plug. If
damage is detected, do not use the
battery charger. Never open the battery
charger yourself. Have repairs
performed only by a qualified technician
and only using original spare parts.
Damaged battery chargers, cables and
plugs increase the risk of an electric
shock.
4.
Do not place any objects on the
battery charger and do not place the
battery charger on soft surfaces.
5.
There is a risk of fire.
6.
Always check that the mains
voltage matches the voltage indicated
on the rating plate of the battery
charger.

Advertisement

Table of Contents
loading

Table of Contents