Deployment Guide
3.
Ensure the HDMI Cable is not faulty
4.
Ensure the laptop/device connected has a functional HDMI port and appropriate video drivers
installed.
3.10
Restoring the RXV100Hub to Factory State
The RXV100Hub supports Windows Push Button Reset (PBR) functionality. This feature restores
the RXV100Hub to its factory state. (Windows recovery)
To reset the RXV100Hub to factory state:
1.
Connect an external keyboard to the RXV100Hub via one of the USB ports
2.
Restart the device or power-off and power-on the device, at the beginning of the boot process
keep tapping on the F11 key on the keyboard. This will open the Windows Recovery
Environment.
3.
Select "Troubleshoot"
4.
Select "Reset this PC"
5.
Select "Remove everything"
Note:
Recovery via "Keep my files" is not supported.
6.
Select "Just remove my files"
Version 1.9
29
3. Troubleshooting
RXV100