Connecting Peripherals To The Block Side Of One Cable; Connecting The Power Cable; Mounting One Cable Inside The Security Box - AudioCodes RXV100 Deployment Manual

1.1.1.3

Connecting Peripherals to the Block Side of One Cable

 To connect peripherals to the block side of One Cable:
Power, Internet Connections, in-room Displays and Peripherals are connected to the Hub by

using the ports on the Block Side of One Cable.
1.1.1.4

Connecting the Power Cable

 To connect the power cable:
Take the yellow end of power cable and insert into bottom right port.

1.1.1.5

Mounting One Cable inside the Security Box

 To mount One Cable inside the security box:
When all 4 blocks are connected, then drop into the security box. Then connect your

accessories and displays, securing with zip tie (not included). Add box top and security
screw. The box can then be mounted under a table, on a wall or behind a display
Deployment Guide 12
RXV100
Document #: LTRT-18190