1.
Enter the Administrator password, and then touch Yes.
2.
Select Windows Settings, and then select the Administrator account displayed in the lower
left corner; a prompt appears requesting the Administrator credentials.
3.
Enter the credentials; upon successful validation, you are logged in as an Administrator to
manage the RXV100Hub.
Note:
The default Administrator password is sfb.
1.1.2.3
Resetting the RXV100Hub
Resetting the RXV100Hub is required to clear test account credentials and peripheral settings.
To reset the RXV100Hub
Click More and select
1.1.2.4
Performing a Recovery Process
To perform a recovery process, use the Microsoft Teams Recovery Tool available at
(https://docs.microsoft.com/en-us/MicrosoftTeams/rooms/recovery-tool)
The RXV100Hub supports Windows Push Button Reset (PBR) functionality. This feature restores
the device to its factory state.
To reset the RXV100Hub to its factory state using PBR:
1.
Connect an external keyboard to the RXV100Hub via one of the USB ports.
2.
Restart it, or alternatively, power it off and then on, and at the beginning of the boot process
keep tapping the F11 key on the keyboard; the Windows Recovery Environment opens.
3.
Select Troubleshoot.
1.1.3
Connecting the TV Display to the RXV100Hub
The RXV100Hub has two HDMI ports located on the One Cable that can drive two external displays
up to 4k resolutions. You should plan to connect at least one external display.
Deployment Guide
Settings, select Reset Device and then
Single External Display
14
RXV100
confirm.
Document #: LTRT-18190