Panasonic PAN9026 Product Specification page 79


5.1.3 Usage Condition Notes
1. Take measures to protect the unit against static electricity.
If pulses or other transient loads (a large load applied in a short time) are applied to the
products, check and evaluate their operation befor assembly on the final products.
2. Do not use dropped products.
3. Do not touch, damage or soil the pins.
4. Follow the recommended condition ratings about the power supply applied to this
product.
5. Electrode peeling strength: Do not add pressure of more than 4.9 N when soldered on
PCB.
6. Pressing on parts of the metal cover or fastening objects to the metal cover will cause
damage.
7. These products are intended for general purpose and standard use in general electronic
equipment, such as home appliances, office equipment, information, and communication
equipment.
5.1.4 Storage Notes
1. The module should not be stressed mechanically during storage.
2. Do not store these products in the following conditions or the performance
characteristics of the product, such as RF performance will be adversely affected:
–
Storage in salty air or in an environment with a high concentration of corrosive gas,
such as Cl2, H2S, NH3, SO2, or NOX
–
Storage in direct sunlight
–
Storage in an environment where the temperature may be outside the range of 5 °C
to 35 °C, or where the humidity may be outside the 45 to 85 percent range
–
Storage of the products for more than one year after the date of delivery storage
period: Please check the adhesive strength of the embossed tape and soldering
after 6 months of storage.
3. Keep this product away from water, poisonous gas, and corrosive gas.
4. This product should not be stressed or shocked when transported.
5. Follow the specification when stacking packed crates (max. 10).
Product Specification Rev. 0.1
5 Cautions, Life Support Policy, RoHS Declaration, and Regulatory Information
PAN9026 Wi-Fi/BT Module
Page 79