Bluetooth - Panasonic PAN9026 Product Specification



2.9 Bluetooth

Type
General
Bluetooth Classic
(BR/EDR)
Product Specification Rev. 0.1
Features
•
Supports Bluetooth 4.2
•
Shared Tx/Rx path for Bluetooth
•
Digital Audio Interface including PCM/TDM interface for voice application
•
Bluetooth and WLAN coexistence
•
WLAN/Bluetooth Coexistence (BCA) protocol support
•
Bluetooth Classic with BT Class 1 support
•
Bluetooth High-Speed (BT 3.0)
•
Baseband and radio Basic Rate (BR) and Enhanced Data Rate (EDR)
packet types with 1 Mbps (GFSK), 2 Mbps (π/4-DQPSK) and 3 Mbps
(8DPSK)
•
Fully functional Bluetooth baseband with:
–
Adaptive Frequency Hopping (AFH)
–
Forward error correction
–
Header error control
–
Access code correlation
–
CRC
–
Encryption bit stream generation
–
Whitening
•
Adaptive Frequency Hopping (AFH) including Packet Loss Rate (PLR)
•
Interlaced scan for faster connection setup
•
Simultaneous active ACL connection support
•
Automatic ACL packet type selection
•
Full master slave piconet support
•
Scatternet support
•
Standard UART and SDIO HCI transport layer
•
SCO/eSCO links with hardware accelerated audio signal pocessing and
hardware supported PPEC algorithm for speech quality improvement
•
All standard SCO/eSCO voice coding
•
All standard pairing, authentication, link key, and encryption operations
•
Standard Bluetooth power saving mechanism (i.e. hold, sniff modes, and
sniff-sub rating)
•
Enhanced Power Control (EPC)
•
Channel Quality Driven (CQD) data rate
•
Wideband Speech (WBS) support (1 WBS link)
•
Encryption (AES) support
•
LTE/MWS coexistence
•
3DG core features for display
PAN9026 Wi-Fi/BT Module
2 Product Overview
Page 34