Panasonic PAN9026 Product Specification page 30


Type
WLAN Baseband
WLAN Radio
WLAN Encryption
Product Specification Rev. 0.1
Features
•
802.11n 1x1 SISO (WLAN SoC with SISO RF radio)
•
Backward compatibility with legacy 802.11a/b/g technology
•
WLAN/Bluetooth LNA sharing
•
PHY data rates up to 150 Mbps
•
20 MHz bandwidth/channel, 40 MHz bandwidth/channel, upper/lower
20 MHz bandwidth in 40 MHz channel, and 20 MHz duplicate legacy
bandwidth in 40 MHz channel mode operation
•
Modulation and Coding Scheme MCS 0 ~ 7 and MCS 32 (duplicate
6 Mbps)
•
Dynamic frequency selection (radar detection)
–
Enhanced radar detection for short and long pulse radar
–
Enhanced AGC scheme for DFS channel
–
Japan DFS requirement for W53 and W56
•
802.11k Radio resource measurement
•
802.11n optional features:
–
20/40 MHz coexistence
–
Space-Time-Block-Coding (STBC) one spatial stream reception and
transmission
–
Short Guard Interval for both 20 and 40 MHz operation (TX/RX)
–
RIFS on receive path
–
Beamformer function and hardware acceleration
–
Greenfield TX/RX
•
802.11mc locationing
•
Power save features
•
Integrated direct-conversion radio
•
20 and 40 MHz channel bandwidth
•
Shared WLAN/Bluetooth receive input scheme for 2.4 GHz band
•
RX Path
 On-chip gain selectable LNA with optimized noise figure and power
consumpttion
 High dynamic range AGC function in receive mode
•
TX Path
 Internal PA with power control
 Optimized TX gain distribution for linearity and noise performance
•
Local Oscillator with fine channel step
•
WEP 64-bit and 128-bit encryption with hardware TKIP processing (WPA)
•
AES-CCMP hardware implementation as part of 802.11i security standard
(WPA2)
•
Enhanced AES engine performance
•
Advanced encryption standard (AES)/Counter-Mode/CBC-MAC Protocol
(CCMP)
•
AES-Cipher-Based Message Authentication Code (CMAC) as part of the
802.11w security standard
•
WLAN Authentication and Privacy Infrastructure (WAPI)
PAN9026 Wi-Fi/BT Module
2 Product Overview
Page 30