Simplicity Signature Series Operator's Manual page 20

Problem
The unit does not propel.
The unit does not discharge snow.
For all other issues, contact an Authorized Service Dealer.
20
Look for
Worn scraper bar.
Incorrect adjustment of traction control cable.
The auger control cable is out of adjustment.
Broken shear pin or shear bolt.
The discharge chute is clogged.
Unwanted debris is lodged in auger.
Remedy
Replace the scraper bar. See Replace the Scraper
Bar.
See Adjust the Auger and Traction Control Cable.
Adjust auger control cable. See Adjust the
Auger and Traction Control Cable.
Replace shear pin or bolt. See Replace the Shear
Pins or Shear Bolts.
STOP THE ENGINE! Make sure that the auger
and impeller do not rotate. Use a clean-out tool to
remove the snow from the discharge chute. DO
NOT clean a clogged discharge chute with your
hands! See Clean a Clogged Discharge Chute.
STOP THE ENGINE! Make sure that the auger
and impeller DO NOT rotate. Use a clean-out tool
to remove the unwanted debris. DO NOT remove
debris with your hands! See Clean a Clogged
Discharge Chute.