Raise / Lower Brush Deck; Fitting The Brush; Floor Tool Transit Bracket - Numatic CRG 8055/100T Owner's Instructions Manual

!
Always ensure that the machine is switched off before making any adjustments.
Raise Brush Deck / Fitting the Brush / Lower Brush Deck
12
Raise brush deck.
Brush in place.
Switch machine on.
When fitting the brushes make sure it is done on a smooth surface.
Please follow the same process to fit both brushes to the CRG 8072 as is for the
single brush fitting on the CRG 8055.
To disengage the brush, remove manually.
Note: Do not lift the brush deck until the brush has stopped revolving or the
brush will release.
Make sure you raise the brush deck before driving to the cleaning site.
Safety Gloves are recommended for the changing of used brushes.

Floor Tool Transit Bracket

When in transit, the floor tool can be placed on the bracket at the rear of the machine.
Simply slot the retaining knob into the bracket.
Brush deck raised position.
10
Lower brush deck.
Press and hold brush engage button.
Machine Set-up Guide
CRG 8072
Twin Brush
Slide brush under machine.
11
Brush deck lowered.
Machine has picked up the brush.
T 01460 68600
!
7