dCS 900E / 902E User Manual
dCS Ltd
Size, Weight and Operating Conditions
Size and Weight
The dCS 900 & 902 dimensions correspond to a standard 2U 19" rack mount
case. Four heavy duty feet, fitted to the base, extend the overall height to
slightly greater than 2U.
Dimensions
Width
Height, without feet
Height, with feet
Depth
Weight
note (i)
note (ii)
note (iii)
Operating Conditions
The case of the dCS 900 & 902 have no ventilation slots or fan cooling, to give:
•
quiet operation (does not need to be installed in a machine room)
•
internal temperature stability
•
improved electrical safety
•
long term reliability
•
no regular maintenance or cleaning requirements
It dissipates relatively low power, so that usually allowing natural convection
provides enough cooling. Do not install the unit near heat sources such as
radiators, air ducts or direct strong sunlight. Ambient should not exceed 50°C,
should not fall below 0°C, and should be a non condensing. If in doubt, the easy
test is – the dCS 900 & 902 are happy to work anywhere a human is.
Manual part no: DOC0029021E1
Contact
on + 44 1799 531 999
dCS
(inside the UK replace + 44 with 0)
All manuals and user guides at all-guides.com
-
430 mm
44 mm
52 mm
390 mm
6.8 kg
Removable 19" rack mount ears are supplied,
taking total width to 483 mm (19").
Measured
connectors. Additional depth should be allowed to
accommodate cable connectors.
The high quality case is necessarily heavy,
consideration should be paid to appropriate support
shelving when installing the units in a rack.
-
Page 49
Manual for Software Versions 1.3x to 1.5x
see note (i)
(2U)
see note (ii)
see note (iii)
from
front
panel
to
rear
Document No: OS-MA-D0002-902.1E1
email to: more@dcsltd.co.uk
web site: www.dcsltd.co.uk
th
12
June 2000
panel