The Menu Sequence; Figure 4 - Menu Sequence - DCS 900E User Manual

dCS 900E / 902E User Manual
dCS Ltd

The Menu Sequence

To access the Function Menu, hold down the Menu Step button and press the Menu Set button.
To step through the Menu items, press the Menu Step button repeatedly.
To select an item or one of its options, press the Menu Set button.
dCS 900E : Use Master/Slave button to alter RS232 address.
dCS 902E : Use Menu Up & Menu Down buttons to alter RS232 address, Tone Level and Tone Frequency.
To exit the Function Menu, either select the End item or wait five seconds.
Func
Opens the
Function Menu
Phone
Displays dCS'
telephone
number
Part
Displays the
control PCB
part number
dCS002540?
v1.5x software
Manual part no: DOC0029021E1
Contact on + 44 1799 531 999
dCS
(inside the UK replace + 44 with 0)
All manuals and user guides at all-guides.com
Issue Filt
Displays the Selects an
fitted software alternative
issue number filter
1.5x Filt 1
Filt 2
...
Filt n
Heat 7 - Seg
Displays the Disables the 7-
internal segment display
temperature when idle.
Fahrenheit On
Celsius Off
S - No RS232
Displays the Displays and
control PCB sets the unit's
serial number RS232 address
0002-540-?-? 0 ... 99
End Loc
Locks out the
Exits the
front panel
Function Menu
controls
Off
On
Figure 4 – Menu Sequence
Page 19
Manual for Software Versions 1.3x to 1.5x
DSD DSD 4
DSD mode is DSD mode is
available on the available on the
dCS 904 only dCS 904 only
Off Off
Test Tone
Turns on and
Runs a display
sets (dCS 902E
self test routine
only) a test tone
Level (dB)
Freq (kHz)
On / Off
Up
BNC O Ref In
This feature is Sets the mode
available on the
of the AES Ref
dCS 904 only I/O connectors
SDIF Loop
Loop.t
Int
Offst A - SL
dCS 902E only:
Automatically
Trims the
slaves when ref
mastermode
input available
sample rate
+9.9 ppm Off
0 ppm On
-9.9 ppm
Document No: OS-MA-D0002-902.1E1
email to: more@dcsltd.co.uk
web site: www.dcsltd.co.uk
th
12 June 2000