Table of Contents
Advertisement
SAFETY INFORMATION
4
• Strenuous physical force may need to be applied to the Metal Bender during
use. Failure to ensure proper footing can quickly result in a fall which could
inflict serious personal injury or property damage. Always work in a clean,
uncluttered environment.
• Be sure there is sufficient working room around the tool to allow for safe
handling of various lengths of metal.
• Pieces of mill scale, rust and other debris may be ejected from the
workpiece during operation. Wear approved eye and skin protection
at all times while operating.
• Excessive resistance while operating could indicate a defect with the
workpiece material or broken or damaged Metal Bender components.
To avoid injury, stop work immediately and inspect workpiece material
for nicks, dents, welds, excessive scale or remaining coatings. Clean or
repair as necessary or discard and begin with a new piece. Also inspect
Metal Bender components for looseness or damage.
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com
FALL OR INJURY HAZARD!
POSSIBLE EYE INJURY
POSSIBLE INJURY
Advertisement
Table of Contents
