Related Manuals for Eastwood HYDRAULIC TUBING BENDER
Summary of Contents for Eastwood HYDRAULIC TUBING BENDER
- Page 1 Item #22199 HYDRAULIC TUBING BENDER INSTRUCTIONS Tubing Bender Dies sold separately...
- Page 2 The EASTWOOD HYDRAULIC TUBING BENDER is a high quality, precision tool capable of creating accurate, smooth, kink-free bends, up to 180° in aluminum, steel, stainless steel and copper tubing, in sizes ranging from 3/4” to 2” with available Eastwood Die Sets. Build roll bars, shop fixtures, go-kart frames and much more with high accuracy and professional results.
-
Page 3: Specifications
Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. To order parts and supplies: 800.343.9353 >> eastwood.com... -
Page 4: Work Area Safety
Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com... -
Page 5: Fall Hazard
(not included), M8 Bolts [E] and Lock washers [F], securely attach them (FIGS 1 & 2). • With the Frame still supported, mount the two Fixed Casters [C] to the Rear of the frame (Fig 3). FIG. 2 FIG. 3 To order parts and supplies: 800.343.9353 >> eastwood.com... - Page 6 The Eastwood Hydraulic Tubing Bender comes pre-filled with 10W Hydraulic Oil. Before initial operation, it is important to verify that the level is correct and that no fluid was lost during shipping.
- Page 7 """" INSTALLING DIES FIG. 6 Dies are NOT INCLUDED with the Eastwood Hydraulic Tubing Bender and are available separately. Curved Dies, U-Straps and Die Follow Bars are sized as a matched set each in accordance with a specific tubing size.
-
Page 8: Installation And Location
If any breakage or damage to the Bender occurs, DO NOT USE until proper repairs are made. The Eastwood Hydraulic Tubing Bender was specifically designed to be operated by one person only. Never have one person operate the lever while one handles the material workpiece or serious injury could occur. - Page 9 HELPFUL TIP: Once the learning curve provides familiarity with the characteristics of the Eastwood Hydraulic Tubing Bender and how it reacts with the most commonly formed tubing sizes, materials and bend amounts, it is extremely helpful to create a FIG.
- Page 10 • To achieve more bending range as needed; the above steps may need to be repeated until the desired bend angle is reached (FIG 20). FIG. 19 FIG. 20 Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
-
Page 11: Maintenance
Die damage. • Store in a clean & dry environment when not in use. Coat all machined surfaces with a light lubricant film of oil or suitable protectant to prevent rust formation. To order parts and supplies: 800.343.9353 >> eastwood.com... -
Page 12: Troubleshooting
If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: tech@eastwood.com PDF version of this manual is available at eastwood.com The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA 800.343.9353 eastwood.com © Copyright 2019 Eastwood Automotive Group LLC 10/19...