STORAGE
• Apply a thin film of light oil or rust-preventive to all bare steel areas.
• Store in a clean, dust-free, dry, dampness free area preferably covered with plastic sheeting.
MAINTENANCE
NOTE: Maintenance should be performed before each use.
• Clean dirt and debris from threaded drive screw.
• Check tightness of all hardware.
• Check operation for binding. Lubricate moving parts and drive screw periodically with medium
bodied chassis grease.
NOTE: The 8mm Shear Pin in the joint of the Drive Bar and Upper link is designed to fail under
excess pressure. If replacing, use a softer material 8mm pin or mild steel bolt (FIG 4).
10
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com