Page 2
Your Eastwood HigH-CapaCity tubing bEndEr is a high quality, precision tool capable of creating accurate, smooth, kink-free bends up to 180° in aluminum, steel, stainless steel and copper tubing, in sizes ranging from 3/4" to 2" with available Eastwood Die Sets. Build roll bars, shop fixtures, go-kart frames and much more with high accuracy and professional results.
Before beginning ANY work with this tool, it is absolutely necessary that it be securely bolted to a properly anchored Eastwood #21116 Bender Stand or a heavy, sturdy, anchored workbench.
Page 4
& sHarp MEtaL HaZard! The Eastwood High-Capacity Tubing Bender consists of moderately heavy metal components which can present a hand/finger pinch hazard and cause potentially serious injuries if dropped on feet. Avoid pinching hands while handling parts during assembly and wear thick, well fitting work gloves to prevent cuts from handling sharp metal.
Page 5
Ratchet/Lever Sub-Assembly (Fig 7). FIG. 6 Mounting HaZard! Mounting to the optional Eastwood #21116 bender stand is strongly recommended for proper operation and maximum safety. if the unit is being attached to a properly and solidly secured stand, do so now.
Page 6
1. Locate the Degree Plate (u) under the Lower Frame Plate, align the 2 holes in the Degree Plate with those in the Lower Frame Plate and fasten with two M8 Bolts (V) (Fig 10). FIG. 10 Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com...
Page 7
M8 Bolts. attaCHing dEgrEE pointEr 1. Thread the base of the Degree Pointer (X) into the M9 thread on the end of the square offset block of the Die (Fig 12). #21116 stand To order parts and supplies: 800.345.1178 >> eastwood.com...
HaZard! it is strongly recommended to use the optional Eastwood # 21129 bender Handle for safest operation. do not use a bender Handle Extension longer than 3’ (1 meter) long or permanent damage to the bender and or serious injury and property damage could occur.
Page 9
Once you are familiar with the characteristics of the Eastwood High-Capacity Tubing Bender and how it reacts with your most commonly formed tubing sizes, materials and bend amounts, it is a great idea to create a series of “Templates”...
1.75" x 6" Radius, 240° Die if you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com PDF version of this manual is available online >> eastwood.com/21115manual The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.345.1178...