Complementary Instructions For Atex Certified Material - ALBIN PUMP ALH Instruction Manual

ALH
Supplemental Instructions
since 1928
for ATEX Certified Materials
10 | SUPPLEMENTAL INSTRUCTIONS FOR ATEX CERTIFIED MATERIALS
Peristaltic hose pump

Complementary instructions for ATEX certified material.

Models: Albin Pump ALH and ALHS
Pumping and operation in zone 0 is completely banned.
The pumps are planned for a use in the following gas and dust explosive atmospheres.
II 2G : zone 1 and 2
II 3G : zone 2 only
II 2D : zone 1 and 2
II 3D : zone 2 only
The following instructions must be read jointly with:
> All ATEX regulations for the country for which the pump is destined.
> Decrees, laws, directives, application circulars, the standards, the code of practice, and any other
document concerning its place of installation.
No responsibility whatsoever is taken for the non-observance of these instructions.
The ATEX form provided by the customer which stipulates all the data concerning his process and
application of the pump is the only evidence in case of dispute. The non-observance of this data will
disengage the responsibility of ALBIN PUMP.
This information is complementary to our general maintenance manual.
The installation of the material must be carried out by qualified and skilled personnel.
Our equipment is marked EEC with the ATEX 94/9/CE title.
Ensure compatibility between the indications being reproduced on the gauge, the present explosive
atmosphere, the zone of use, ambient and surface temperatures.
Until the 30.06.2003, the equipment on the market could be equipped with accessories or (and)
components certified according to the rules of CENELEC relating to the electric materials usable in
explosive atmospheres of group II. From this date, the accessories or (and) component assembled
equipping the motors with our pumps must have an EEC examination certificate.
52 albinpump@irco.com Albinpump.com

Albin Pump ALH Instruction Manual
