Lubrication Table; Shoe Shimming Table - ALBIN PUMP ALH Instruction Manual

ALH
Characteristics / Technical Specifications
since 1928

9 .7 - LUBRICATION TABLE

The table indicates the quantity of lubricant necessary for every pump size. Employ only the ALBIN
lubricant for ALBIN hose pumps. refer to §6.2 for lubricant emptying and filling.
LUBRICANT
L (gal)
PUMPS ALH 5-10 ALH15-20
QUANTITY OF 0.2 0.55
LUBRICANT (0.05) (0.14)

9 .8 - SHOE SHIMMING TABLE

Refer to §6.5 to remove or add shims. The table below points out the necessary number of shims
under every shoe according to the speed, pressure and the temperature of the product. Respect these
indications scrupulously to optimize the hose life and to avoid a possible deterioration of the internal
parts. For temperatures exceeds 60°C (140°F), withdraw one shim in comparison with the table below.
For viscosities over 3000cP or concentrations exceeding 300g / l, withdraw one shim in comparison
with the table below. For a suction lift higher than 4 meters, add one shim to the following figures.
CAUTION: Every shoe must include the same number of shims 0.5mm (0.02 inch).
PUMP TYPE ALH25
Pressure bar (psi)
∆P ≤ 5 (72.5)
5 (72.5) ≤ ΔP ≤ 7.5 (108.75)
7.5 (108.75) ≤ ΔP ≤ 10 (145)
10 (145) ≤ ΔP ≤ 15 (217.5)
PUMP TYPE ALH40
Pressure bar (psi)
ΔP ≤ 5 (72.5)
5 (72.5) ≤ ΔP ≤ 7.5 (108.75)
7.5 (108.75) ≤ ΔP ≤ 10 (145)
10 (145) ≤ ΔP ≤ 15 (217.5)
ALH25 ALH32 ALH40
2 3 3
(0.53) (0.8) (0.8)
Number of
Speed - Rpm
shims
0 to 40 0
ΔP ≤ 5 (72.5)
40 to 160 0
0 to 40 2
5 (72.5) ≤ ΔP ≤ 7.5 (108.75)
40 to 125 1
0 to 40 3
7.5 (108.75) ≤ ΔP ≤ 10 (145)
40 to 105 2
0 to 40 4
10 (145) ≤ ΔP ≤ 15 (217.5)
40 to 90 3
Number of
Speed - Rpm
shims
0 to 40 0
ΔP ≤ 5 (72.5)
40 to 160 0
0 to 40 2
5 (72.5) ≤ ΔP ≤ 7.5 (108.75)
40 to 125 1
0 to 40 3
7.5 (108.75) ≤ ΔP ≤ 10 (145)
40 to 105 2
0 to 40 4
10 (145) ≤ ΔP ≤ 15 (217.5)
40 to 90 3
Albin Pump ALH Instruction Manual
ALHX40 ALH50 ALHX65 ALH65
6 13 16 13
(1.59) (3.43) (4.2) (3.43)
PUMP TYPE ALH32
Pressure bar (psi) Speed - Rpm
PUMP TYPE ALHX40
Pressure bar (psi) Speed - Rpm
Albinpump.com

ALHX80 ALH80 ALH100
27 40 80
(7.13) (10.57) (21.13)
Number of
shims
0 to 45 0
45 to 140 0
0 to 45 2
45 to 140 1
0 to 45 3
45 to 110 2
0 to 45 4
45 to 80 3
Number of
shims
0 to 40 0
40 to 120 0
0 to 40 2
40 to 95 1
0 to 40 3
40 to 75 2
0 to 40 4
40 to 60 3
albinpump@irco.com 47

ALH125
120
(31.7)