Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ALBIN PUMP ALHP Series
Summary of Contents for ALBIN PUMP ALHP Series
- Page 1 1928 ALBIN PUMP ALHP in-line pulsation dampener Manual of maintenance...
-
Page 2: Table Of Contents
Manual of maintenance CONTENTS GENERAL How to use this manual Service and support Disposal of waste and the environment Specifications SAFETY Symbol Intended use Compliance Pressure Equipment Directive Use in Potentially Explosive Environments (ATEX) Responsibility Qualification of the user Regulations and instructions WARRANTY CONDITIONS DESCRIPTION Identification of the product... -
Page 3: General
For information with respect to specific adjustments, installation, maintenance or repair that fall beyond the scope of this manual, contact your Albin Pump SAS representative. They will be happy to help. Make sure you have the following information at hand: •... -
Page 4: Intended Use
The pulsation dampener is exclusively designed for the damping of pulses on the discharge side of an Albin hose pump. After consultation with your Albin Pump SAS representative, and only on certain conditions, the pulsation dampener may be used as a pressure relief valve. Ev- ery other or further use is not in conformance with the intended use1. -
Page 5: Qualification Of The User
Warranties purporting to be on behalf of Albin ump SAS made by any person, including rep- resentatives of Albin pump SAS., its subsidiaries, or its distributors, which do not accord with the terms of this warranty shall not be binding upon Albin ump SAS unless expressly approved in writing by a Director or Manager of Albin ump SAS. -
Page 6: Pulsation Dampener Hose
The pulsation dampener types mentioned on the front cover are functional with more than one type of Albin Pump hose pump type. In the following table the right pulsation dampener can be selected to match your hose pump: Selection table pump and pulsation dampener... -
Page 7: Installation And Commisioning
INSTALLATION AND COMMISIONING Unpacking When unpacking carefully follow the instructions as given on the packaging or on the pulsation dampener. Inspection Check that your delivery is correct and check it for any transport damage Installation conditions 5.3.1 Ambient conditions Make sure the ambient temperature, during normal operation of the pulsation dampener, does not fall to below -20°C, and does not exceed +65°C. -
Page 8: Pressurizing The Pulsation Dampener
Pressurizing the pulsation dampener CAUTION Do not pressurize the pulsation dampener if it is not built into the pipe system. Con sider the maximum operating pressure. Exceeding the maximum operating pressure may lead to serious injuries or damage to the pump and the environment. CAUTION Consider the filling medium for the pulsation dampener housing –... -
Page 9: Maintenance
MAINTENANCE During the development of the pulsation dampener, Albin Hose Pumps has once more applied its reputation in the area of simplicity, reliability, and maintenance-friendliness. However, care- ful maintenance and, in particular, scrupulous cleaning are essential conditions for problem- free operation of the pulsation dampener. •... -
Page 10: Mounting The Pulsation Dampener Hose
Support the pulsation dampener in such a way that it cannot fall during disassembly. Remove the mounting bolts from both flanges. Lift the pulsation dampener onto a suitable workbench. Adhere to the instructions for lifting and moving as mentioned in paragraph “Lifting and moving the pulsation dampener”. -
Page 11: Troubleshooting
TROUBLESHOOTING If the pulsation dampener does not function (correctly), consult the following checklist to see if you can remedy the problem yourself. If you cannot, please contact your Albin Pump SAS representative. Problem Possible cause Solution (Heavy) vibration of Pump,... -
Page 12: Dimensions
DIMENSIONS... -
Page 13: Technical Specifications
TECHNICAL SPECIFICATIONS General information of the pulsation dampener Description Value Max. operating pressure 16 bar (232 psi) Ambient temperature -20°C to 45°C (-4°F to 113°F) Product temperature -10°C to 70°C (14°F to 158°F) Storage temperature -40°C to 70°C (-40°F to 158°F) PED directive 97/23/EC Max. - Page 14 For more information about our worldwide locations, approvals, certifications, and local representatives, please visit www.albinpump.com. ALBIN PUMP reserves the right to incorporate our latest design and material changes without notice or obligation. Fax +33 (0) 4 75 90 92 40 Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should courrier@albinpump.fr...
Need help?
Do you have a question about the ALHP Series and is the answer not in the manual?
Questions and answers