Advertisement
Quick Links
Alps Bedside Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
screw
bolt
dowel
locking
x10
x4
x14
nut x14
J
K
L
M
felt
wedge
screw
bracket
x4
x2
x4
pad
x4
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
D
E
F
screw
slide
slide
x26
rail x2
rail x2
N
O
P
cover
seal
bracket
x4
x2
x2
Hardware Supplied
Phillips & Flathead screwdrivers
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
G
I
H
slide
slide
rail x2
rail x2
Q
R
S
bolt
screw
Allen
x16
x16
key
x1
V
W
X
safety
screw
wall
x1
strap x1
anchor
x1
Wall Strap
Y
Z
wall
washer
screw
x2
x1
1
Advertisement
Related Manuals for Mocka Alps Bedside Table
Summary of Contents for Mocka Alps Bedside Table
- Page 1 Phillips & Flathead screwdrivers For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 Attach 1x slide rail (F) and 1x slide rail (G) to panels [3] and [4] as shown and secure with 12x screws (E). Tighten with a screwdriver. Insert 2x bolts (C) into panels [3] and [4]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 Attach panel [4] and panel [3] to panel [5] with 2x dowels (A) and Tighten with a screwdriver. Place 1x cover (N) over the bracket (M) secure with 2x locking nuts (D). Tighten with a screwdriver. as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Attach panel [4] and panel [3] to panel [1] with 4x dowels (A) and secure with 4x locking nuts (D). Tighten with a screwdriver. and [3] to form the back of the unit as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Attach 1x bracket (M) to panel [2] and secure with 2x screws (E). Tighten with a screwdriver. Place 1x cover (N) over the bracket (M) screws (B). Tighten with a screwdriver. as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 1x screw (E). Tighten with a screwdriver. 16x bolt (Q) as shown. Tighten with an Allen key (S). Attach 4x felt pads (L) to the ends of the legs. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 Attach panel [9] and panel [10] to panel [8] secure with Slide panel [11] along the grooves between the side panels [9] and [10]. 4x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 Attach slide rail (I) and slide rail (H) to the underside of the side panels Tighten with a screwdriver. as shown. Secure with 4x screws (E) and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 9 Attach 1x safety straps (V) to the top of the back side of the unit as catches on the seal (O). shown using 1x washers (Z) and 1x screws (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 10 (V). Fasten to the wall using 1x washers (Z), 1x wall anchor (X) and 1x screws (Y). Ensure unit is balanced and steady before use. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Alps Bedside Table and is the answer not in the manual?
Questions and answers