Honeywell evohome Applications Manual page 41

4.8.2 Checking RF communication
f Select Menu BINDING AND RF TEST.
The DT92 controller sends test signals to the evotouch
controller in order to test the signal strength.
The device is now in the test mode and sends test signals
to the evotouch controller.
i
The signal strength can be EXCELLENT, GOOD, POOR or not received.
Deactivating the RF communication check
f Remove and re-insert the batteries of the DT92.
Completing configuration
f Press the DONE button.
Configuration of the DT92 room adjuster/sensor is completed.
Application Manual 41