Table of Contents
Advertisement
Chapter 1. Introduction
Normal (CSU) Timing
NETWORK
INTERFACE
TIMING SOURCE
OSC
1 6
The typical timing option arrangement is shown in
Figure 1-8. The PBX is looped timed sending data to
the TSU 100 which is actually synchronous to the
received data. The Network Interface (NI) is the
actual source of all timings. This timing option is the
same as that typically used for CSUs. This is the
preferred mode for use with a PBX application.
1
2
OPTION SLOTS
The network interface and secondary interface clocking
options are set by using the Network (NI) Configuration
menu options.
TSU 600 User Manual
3
4
5
SECONDARY
INTERFACE
6
(Option)
PBX or
Second Network
Figure 1-8
Normal (CSU)
61200.076L2-1
Advertisement
Table of Contents
